High Performance L-Band Fiber Optic Transmission Systems
- 950-2150 Mhz
- Up to 50km range
- 9 dB RF gain from TX to RX
- 20 dB Noise Figure
- LNB power up to 400mA
- Long Line Compensation (LLC) feature for LNB power
- Color OLED Display w/ button joystick for navigation
- Monitor laser status, LNB Power,
- Polarization, RF Gain
- Single Mode APC
- ST, SC, LC, FC
- Small, rugged, portable
- Stand alone or rack
The FLT/FLR-2150 L-Band fiber optic link is ideal for connecting antennas with control rooms, network operation centers or broadcast head ends and is far more than just an alternative to coaxial cabling in teleport earth stations.
The Satlink system has been designed to provide very low carrier-to-noise ratio and extremely linear performance. This equates to a cost effective technically superior installation for the satellite signal user. Only FLT/FLR-2150 links have ultra wide dynamic range so that auto gain control is not required to cope with changing signal intensity caused by meteorological conditions.
A range of options to accommodate a variety of installations is offered, such as 75 Ohm or 50 Ohm impedance with either BNC or F connectors and we utilize high performance DFB lasers. For installations where the number of cross site fiber connections is limited, the complete ITU range of CWDM transmitter wavelengths is offered allowing up to eight channels to be carried on one fiber. Optical connector options include ST, LC, FC, or LC APC. Angle-polished connectors are strongly recommended.
The FLT/FLR-2150 can be conveniently rack mounted three across in one RU with our RMT Rack Mount Kits. Power can come from either a 12V brick adapter or any source in a range from 9 to 24V DC.
But what really makes these new modules different is the 1” (diagonal) color OLED display that isn’t just for looks. The display is enabled by a proximity sensor on the face plate so there is no distraction from a display that is always on. Menu navigation is via an easy- to-use button joystick. The OLED will display system information such as LNB Power on/ off, inform you of laser status, RF gain/loss, link and other essential parameters.
LNB polarity is easily set at the TX unit.
The FLT/FLR-2150 represents a new way to think about how you move your L-Band RF signals. No longer must you have expensive frames and power supplies . No longer does it need to be difficult. Simply plug in power, your coax and your fiber and trust MultiDyne to deliver your RF signals.
|Flatness||+/- 1.25 dB|
|Gain Stability||0.25 dB|
|RF link gain||9 dB +/- 3 dB|
|Noise figure||20 dB|
|Return loss||>15 dB Max inout power||+15 dBm|
|Connectors||75Ω F or 50Ω BNC LNB volts(LCC off) 13V Vert. / 18V Horiz. LNB Volts(LCC on) 14V Vert. / 19V Horiz. Universal LNB(lo) 22 KHz|
|Wavelengths 1310 or 1471-1611 Optical Connector APC ST, SC or LC Optical Source DFB|
|Optical Detector||PIN Diode TX Output||+4 dBm|
|RX Sensitivity -16 dBm|
|Link Margin||15 to 20 dB (up to 40km) Fiber Type||Singlemode|
|Temperature:||0 to +50C Storage temp. -20C to +7-C|
|Humidity||0-95% RH non-condensing Dimensions||5.5 x 1.5 x 7 inches|
|Display||1 inch color OLED w/ proximity|
|sensor indicates Power, Laser Status, LNB Power, LLC, Alarms, optical power|
|Cursor Ctrl||Button joystick|
Angle-polioshed connectors are NECESSARY (SC/APC, FC/APC) Power Supply Included
L-Band RF (950 – 2150 Mhz) fiber optic transmitter, with high performance DFB laser, low carrier-to-noise ratio, Specify 75 Ohm or 50 Ohm impedance with either BNC or F connector, 1310nm, Singlemode, 1 fiber
L-Band RF (950 – 2150 Mhz) fiber optic receiver, with high performance DFB laser, low carrier
to-noise ratio, Specify 75 Ohm or 50 Ohm impedance with either BNC or F connector, 1310nm, single-mode, 1 fiber