Video Communication Systems
  • FVT-1100-HDMI - Bi-Directional Uncompressed HDMI/DVI-D Over Single Multimode Fiber Transmitter - VidOptic Series

FVT-1100-HDMI - Bi-Directional Uncompressed HDMI/DVI-D Over Single Multimode Fiber Transmitter - VidOptic Series

  • Brand: VidOvation
  • Product Code: FVT-1100-HDMI
  • Availability: In Stock

Uncompressed HDMI / DVI-D Link with HDCP & EDID over
Single Multimode Fiber

 

  • HDMI, DVI-D, WUXGA 1920x1200 Support
  • Bi-Directional link allows for unaltered HDCP and EDID communications
  • Uncompressed 24-bit signal transport
  • 1000m range possible over Quality Multimode Fiber
  • Intact HDCP encoding for switched signal distribution schemes

 

OVERVIEW

 

The FVT-1100-HDMI transmitter, along with the FVR-1100-HDMI receiver, create an affordable HDMI / DVI fiber link that allow for bi-directional pass-through of both HDCP and EDID information.  Uncompressed HDMI video and up to 1920x1200 WUXGA resolutions are supported to ranges up to 1000 meters on quality multimode fiber.  Pixel level image transport with zero frame dropping and 24-bit scan rate happens with no contouring or bit reduction.

Because both HDCP and EDID are handled normally when source and display are linked via a FVT-1100-HDMI pair, the content protection and resolution information are available through routing devices that allow transport between the transmitter and receiver pair.  This is important when moving copyright protected content to monitors of varying resolutions.

For DVI-D sources, the FVT-1100-HDMI use a hybrid cable adaptor, and HDCP and EDID information still remains.  USB power ports are found on transmitter and receiver units, making it possible to be free of the included standard power supplies.

 

Write a review

Note: HTML is not translated!
    Bad           Good

VidOvation Corporation - 23 Spectrum Pointe Drive, Suite 206, Lake Forest, CA 92630 USA

Copyright 2017. All Rights Reserved Terms & Condition

Live HD Video Transmission
<